|
|
Build Your Online Product Catalogs?
| Product Name: |
Stainless steel shower KBA8307
|
| Supply Ability: |
|
| Related proudcts |
shower, shower mixer, rain-shower combinat, |
| Specifications |
Stainless steel wire drawing |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
|
| Unit Price: |
|
|
Faucet maintenance knowledge
A, the installation should completely remove all kinds of impurities in the pipeline, can avoid impurities on the spool caused damage, jam, blockage and leakage. At the same time should be timely cleaning faucet surface so that they do not leave the building material residue.
B, of any kind products taps at the switch had no need to handle a large force, just gently twisting or toggle handle can be. The leading products outlet filter cover after use for a period of time should be washed to remove impurities removing. Equipped with hose products should be noted that the hose often keep the natural stretch, so as not to break.
C, faucet surface should always use a clean soft cloth dipped in a little cleaner gently wipe, disable the wire or with a hard particles of cloth, etc.. In addition, must not be collided with a hard object collision surface water.
D, the use of the near the faucet will sometimes occur not complete closure, leakage, handle loose, loose connections and other phenomena, in general, consumers can solve their own. Such as the spiral type rubber sealing ring tap is not closed completely, usually because of a hard debris stuck sealing, then just unloading handwheel unscrew the valve cover, clean up around the spool impurities according to the sample bottles and can be returned to normal use. Such as ceramic valve core sealing tap is not closed completely, it may hard debris scratch sealing surface or on the spool of pre tightening force is not enough. If the former, can only be sent to the factory service department or professional repair department repair. If the latter, only by the user to remove the handle (hand wheel) after the spool can be slightly tightened.
E, handle (hand wheel) loose generally have two reasons: first, when the assembly is not due to the handle (hand wheel) is not tight, just need to tighten the fastening screws can be. Two is the handle (hand wheel) selection is poor, mostly in the handle (hand wheel) and valve core connection of premature |
| Company: |
Heshan Zhishan Town KeBei Sanitary Ware Manufacturing Co.,Ttd
|
| Contact: |
Ms. Daisy huang |
| Address: |
Shuikou city, Kaiping |
| Postcode: |
529327 |
| Tel: |
0750-8400036 |
| Fax: |
0750-8400036 |
| E-mail: |
|
|
|
|
Home
